Gill Oil Condition Monitoring Sensor
The Gill Oil Condition Monitoring Sensor with Display features the same measurement options as the 4212 Oil Condition Sensor, with an additional local indication display. The local LED display provides a simple red, amber and green light indication of the status of the condition of the machine.
Fine and coarse particle contamination is a major cause of breakdowns in hydraulic and lubrication oil systems; therefore continuous real-time oil debris monitoring plays a crucial role in developing a predictive maintenance strategy.
The Oil Condition Sensor with Display has been developed to assist the plant or automotive engineer to improve the reliability of their equipment. By continuously monitoring the most common causes of gearbox and transmission failure, the sensor provides early indications of a potential problem allowing for planned investigation and remedial action to be implemented before catastrophic failure occurs.
The Gill Oil Condition Monitoring Sensor offers 4 types of measurement outputs and with no specialist knowledge required to analyse the outputs, the sensor offers a low cost of ownership. By allowing the end user to identify and thereby eliminate an unplanned breakdown, the oil condition sensor gives a quick and positive return-on-investment.
Powerful magnets attract and retain ferrous particles in the fluid. Identification is either fine wear particles signalling fluid cleanliness or increased wear rates, or coarse failure pieces giving early indication of possible component failure.
Additionally, the sensor will provide an alarm condition of water contamination in oil, which can lead to subsequent part failure and an oil presence alarm, signalling either low oil levels or leakage.
Available with either 0-10V, 4-20mA or CAN outputs, along with a local visual alarm option, the Sensors are designed to suit most data collection devices such as Dataloggers, PLC’s, ECU’s. The sensor features a simple metric thread with an O-ring seal for direct fitting into a gearbox or transmission housing.
Analogue 0-10V, 4-20mA, CAN J193
Voltage, 4-20mA 10Hz
Voltage + 6 to +24V DC
4-20mA +9 to +26 V DC
CAN +5 to +26 V DC
Sensor -40° to +150°C
Enclosure -40° to +85°C
Sensor IP66 / IP68 / IP69K
Sensor 57 x Ø24.5mm
Enclosure 105.5 x 105.5 x 66mm
Fuel, Oil, Coolant, Saltwater
(see datasheet for more detail)