Ronds

With Emerson´s AMS EZ 1000 eddy current sensor and converter you always have the part you need when you need it. With one converter that is compatible with a range of sensors and cables, you’ll be able to mix-and-match your spares to your application while reducing your converter inventory. And with an easy-to-use procedure for field calibrations, you’ll be back to work sooner. The AMS EZ 1000 makes changing out sensors following a shutdown or replacing sensors during turnarounds/maintenance quick and painless.

The Ronds RH712 Vibration Analyser by Ronds has been designed to meet the surge in demand for network machine condition monitoring and fault diagnosis. ATEX version is available on request.

The Ronds RH505 Wireless Single Sensor is an ATEX certified single sensor that collects both vibration and temperature data. The sensor can be fitted onto any piece of rotating or vibration equipment and is capable of running continuously for over two years.

The Ronds RH560 Wireless Gateway Data Collector can receive data from up to 60 wireless accelerometers and is capable of storing up to 1 GB of data. Once installed, it is quick and easy to add additional wireless sensors to your network over time. The Gateway sends the data to a dedicated/remote server using a 4G, ethernet or WiFi connection.

The Ronds MOS3000 Wireless Software allows all of the collected data to be hosted on a remote or local server, all accessible from any internet-enabled device to view online dashboards or perform in-depth analysis on your data.

The Ronds RH1000 monitoring system utilises industry standard ICP/IEPE accelerometers to detect vibration signatures.

The Ronds RH1000 Online Monitoring system provides cutting-edge technology for the monitoring of high speed and low speed rotating assets to provide the earliest indication of machinery faults.

The Ronds RH625 dual-channel wireless monitor enables monitoring to take place below ground assembly of vertical pumps to provide a more accurate and complete picture of pump health.

The Ronds RH605 is an ATEX certified triaxial sensor that collects both vibration and temperature data. The sensor can be fitted onto any piece of rotating or vibration equipment and is capable of running continuously for over two years.

The Emerson AMS 2140 Machinery Health Analyzer takes vibration data and analysis measurements to the next level. It features simultaneous four-channel plus phase data collection and unique peak detection capabilities for the earliest indication of bearing and gearbox degradation. In addition to delivering faster data collection for less time in the field or more machines monitored, the AMS 2140 is ergonomically designed for comfortable, single hand operation all day long.

The Ronds RH712 Vibration Analyser by Ronds has been designed to meet the surge in demand for network machine condition monitoring and fault diagnosis. ATEX version is available on request.

Leading an industrial maintenance team requires a unique combination of communication skills, industry knowledge and technical expertise. Implementing standard work and a preventive maintenance program is more than just good for business – it also aligns your team with a common goal of safely and efficiently keeping the plant up and running. Choosing the right tools can make a significant difference in the success of these types of programs, the Fluke Ti300+ Thermal Imaging Camera could be the perfect tool to help you achieve this.

Boost yours or your team’s performance with 320 x 240 resolution infrared images taken with the Fluke TiS60+. Capture smaller temperature differences from farther away. If you are new to thermal imaging or if your camera is being used by a team with varying levels of thermal imaging experience, the Fluke TiS60+ offers fixed focus with the ability to capture quality images from farther. The Fluke TiS60+ allows you to see things that are invisible to the eye and reveal problems that cannot be detected with other technologies. It is a simple to use, dependable tool that the team can rely on.

Get the right blend of infrared, battery life, and analysis with the Fluke TiS20+. Whether you are up on the roof doing an HVAC inspection, deep in the plant inspecting a motor, or if you have locked out an electrical panel you rely on your tools to have the power and features to do your job done fast, without extra trips back to the truck or the shop. The Fluke TiS20+ thermal camera puts the power of thermal imaging at your fingertips. Designed to make your job quicker and easier this thermal imager is the right tool for commercial electricians, HVAC/R technicians and maintenance technicians.

A Smart Alignment System Certified for Work in Hazardous Areas. The core values at Fixturlaser, GuideU and Alignment Intelligence, have led to the development of several first industry functions, where True Live and VertiZontal Moves™ are unique on the market for laser-based shaft alignment tools. They bring ease of use to the end users, which above all facilitates easy precision shaft alignment, on-the-job time saving, improved reliability, and more importantly, money savings.
With the FIXTURLASER EXO, you get all this in an intrinsically safe shaft alignment package.

The laser-based shaft alignment tool, the Fixturlaser EVO, is all about evolved simplicity. It is a product without the frills and the bling, bling that stays true to our core values: simplicity, user-friendliness, and innovative techniques, while at the same giving you the power of alignment in your hands.

Connectivity, mobile devices, and apps are integrated into the Fixturlaser AT-200 making it a tool for short response time between machine failures and corrective actions. The smart sensors use CCD technology for superior measurement performance and precision alignment.

The all-digital wireless Fixturlaser ECO is an entry-level system dedicated to horizontal shaft alignment. With wireless sensor units, a 4” colour display, rechargeable batteries, and an IP65 design that withstands harsh environments, you have a laser alignment system that is very easy to use.

The Fixturlaser Laser Kit consists of two wireless sensor units utilizing two-line lasers. The use of line lasers simplifies the setup process minimizing setup time. To make it even easier the sensors comes pre-mounted on its fixtures and pre-set to the most common setup.